Coal Age Magazine - For more than 100 years, Coal Age has been the magazine that readers can trust for guidance and insight on this important industry.
Issue link: https://coal.epubxp.com/i/863175
July/August 2017 www.coalage.com 45 product news continued Mine No. 7), with commissioning planned for early next year. The newest order marks continued growth of SUEK's Cat longwall equipment. The mining company currently operates four longwall faces with Cat roof supports, and it has nine complete Cat AFC systems. In 2016, SUEK produced more than 105 million mt (116 tons) from its 14 longwall systems and 14 open-pit mines. www.eickhoff-international.com www.cat.com Impact Cradle The curved design of the Impact Cradle from Superior Industries eliminates the space between the belt and bed, adding extra protection. Designed to fit into an existing idler mounting footprint, it's built to receive the blunt force of material flow at transition points in conveying systems, lessening the wear on the conveyor belt. Thick urethane segments absorb shock and dissipate contact energy, reducing conveyor belt wear and tear. Fitted for CEMA C, D and E idlers, the Impact Cradle is available in 20° and 35° trough angles for 5-, 6- or 7-inch diameter roll heights. www.superior-ind.com Flared Multirow Cage Mills The F-Series, or Flared Series, Cage Mill from Stedman features a flared discharge opening, efficiently reducing the wettest and stickiest of materials, either abrasive or nonabrasive, without clogging. A multirow cage design takes material into the center of the inner-cage where it impacts on the cage impact bars and is hurled by centrifugal force into the path of the counter-rotating outer cage bars. This multistage reduction multiplies the impact force and results in higher first-pass yields. The cage mill is ca- pable of producing a variety of product gra- dations by changing the mill speed. Feed sizes up to 3.5 inches are typical with capac- ities from 1 ton to 200 tons per hour (tph). A variety of linings are available for the unit. www.stedman-machine.com Flatbeds for Work Trucks The new 6000 and 8000 Series Flatbeds by Besler Industries are made with 11 gauge deck plate, 4-in. channel stringers and 3/16- x 3-in. channel cross members to withstand the toughest daily farm and com- mercial use. Standard equipment includes tie-down rails with stake pockets, LED lighting, a bolt-in fifth wheel assembly with 30,000-lb ball, and a bolt-in bumper with receiver hitch. Also standard are trailer con- nectors in four pin, six pole and seven blade versions. The flatbeds are factory primed and painted with two component urethane enamels. Lights and trailer plugs are wired with a dependable woven wire harness that is installed in the bed. The 6000 Series Flat- bed has optional equipment that includes removable side rails, chrome handle, mud flaps as well as under-the-deck and on-top- of-the-deck tool boxes. A choice of modular fitting, weatherproof tool boxes and sizes are designed to securely hold and organize your tool inventory. The 8000 Series Flat- beds starts with the same construction and standard features as the 6000 Series, but is designed standard with four under-bed tool boxes that are mounted underneath in the skirt. The boxes are modular so they can be taken out when installing the flatbed. There are eight sizes of skirted flatbeds to fit single and dual wheel trucks www.beslerindustries.com Experienced. Trusted. Proven. • Scoops (Battery and Diesel) • Longwall Shield Haulers • Battery Haulers • Utility Vehicles • Rebuild and Repair Services • Parts and Support P.O. Box 719 Pounding Mill, VA 24637 Phone 276.991.3345 www.simmonsequip.com sales@simmonsequip.com Simmons Equipment Company Lending Coming Back to the Coal Industry! Iron City Capital is bringing capital back to the Coal Industry. Our team provides financing for both under- ground and surface equipment. Lease or Loans with flexible terms and condi- tions. Iron City also provides working capital for your company to operate and grow. Our team has served the Coal Industry for over 20 Years and has a great understanding of your equipment and capital requirements. Contact: Anthony Salm asalm@ironcitycap.com 1-440-263-8672 Visit us at: www.ironcityfinance.com